Rugged Waterproof Handheld Meters
IQ160 Waterproof Meter
This meter is able to accurately measure pH using either non-glass ISFET probes or traditional glass electrodes with a BNC connector.
This meter has automatic or manual temperature compensation, automatic buffer recognition and up to a three-point calibration. The stainless steel pH probe has an ISFET silicon-chip sensor that stores dry and needs no maintenance. An optional glass ORP probe is needed for ORP measurements. This meter is an excellent choice to withstand harsh use in the most difficult applications Complete kit ships with a non-glass stainless steel pH probe.
Specification Details Here
IQ160NP
"IQ160 Waterproof, Dual Technology pH meter"
|
|
IQ160-77
IQ160 Meter & ISFET Probe only
|
|
IQ160-Kit
"IQ160NP Meter with PHW77-SS pH Probe, CC70-1 Field Carrying Case & Calibration Kit, and RH10 Rubber Holster"
|
| |
|
|
|
|
" Probe Selection - PHW77-SS"
ISFET Stainless Steel General Purpose Probe with Waterproof Connector.
|
|
" Probe Selection - PHW57-SS"
Stainless steel pH probe with ISFET silicon chip sensor. Heavy duty handle ideal for meat piercing applications.
|
|
" Probe Selection - PHW37-SS"
ISFET Stainless Steel Piercing Tip Probe with Waterproof Connector
|
| |
|
|
|
|
" Probe Selection - PHW47-SS"
ISFET Stainless Steel NMR Tube Probe with Waterproof Connector
|
|
Accessory - CB30
"pH Calibration Kit 500 mL Bottles: 4.0, 7.0, 10.0 pH Buffers and Probe Rinse"
|
|
 Accessory - PCS50-01
500 ml bottle of Probe Cleaning Solution. Pepsin cleaning solution for removal of Protein Deposits.
|
| |
|
|
|
|
" Probe Selection - PH30-GS"
Epoxy Body/ Glass Sensor Probe (for IQ150 System)
|
|
" Probe Selection - ORP110-GS"
"Model ORP110-GS Standard ORP probe (for IQ150 System -- BNC connector, 3' lead, 12x110mm barrel, platinum band)"
|
|
|
| |
|
|
|
|
IQ170 Multi-Parameter System
Waterproof dual technology pH, Conductivity, TDS and Salinity System
This meter is a multi-parameter system able to accurately measure pH using either non-glass IFSET probes or traditional glass electrodes. In addition, this meter also measures Conductivity, TDS (Total Dissolved Solids) and Salinity. A rugged, NEMA4x (IP 67) Waterproof, Chemical Resistant, Dust Resistant, Floating meter showcases an extra large LCD display with LED backlight.
For pH measurement, this meter has automatic or manual temperature compensation, automatic buffer recognition of seven pH buffers, with up to a three-point calibration. The stainless steel pH probe has a virtually unbreakable sensor that stores dry and needs no maintenance, thereby eliminating the frustrations of using delicate glass electrodes.
For conductivity, the meter features automatic probe cell constant probe recognition with auto ranging, and up to five-point conductivity and TDS standardization. Complete kit ships with both a non-glass pH probe and solid state conductivity electrode.
Specification Details Here
IQ170-Kit
"IQ170NP Meter with PHW77-SS pH Probe, CDW97-KP5 Conductivity Probe, CC70-3 Field Carrying Case & Calibration/Standards Kit, and RH10 Rubber Holster"
|
|
IQ170-77KP5
"IQ170NP Meter with PHW77-SS pH Probe, and CDW97-KP5 Conductivity Probe"
|
|
IQ170NP
"IQ170 Waterproof, Dual Technology Multi Parameter meter"
|
| |
|
|
|
|
" Probe Selection - PHW77-SS"
ISFET Stainless Steel General Purpose Probe with Waterproof Connector.
|
|
" Probe Selection - PHW17-SS"
Stainless steel micro pH probe with ISFET sensor.
|
|
" Probe Selection - PHW57-SS"
Stainless steel pH probe with ISFET silicon chip sensor. Heavy duty handle ideal for meat piercing applications.
|
| |
|
|
|
|
" Probe Selection - PHW47-SS"
ISFET Stainless Steel NMR Tube Probe with Waterproof Connector |
|
" Probe Selection - CDW97-K1"
"Conductivity Probe, 4 platinum band contacts, 12mm dia x 110 mm length, glass body, K=1 cell constant, 30K ohm thermistor, 3 ft cable with waterproof Switchcraft connector. Range 0-120,000 micro-siemens." |
|
"Probe Selection - CDW97-KP5"
Conductivity probe, General purpose "bull's-eye" design: 4 cell, K=0.5 cell constant, epoxy body, graphite contacts, 30K ohm thermistor, 16mm dia x 110mm length,with 3 ft cable with Switchcraft waterproof connector. Range 0 to 100,000 micro-siemens NOTE: The "P" shown in conductivity probe part numbers denotes decimal point placement, e.g. KP5 stands for a cell constant of 0.5 |
| |
|
|
|
|
" Probe Selection - CDW97-K10"
"Conductivity Probe for Salinity and Brackish Water, 4 cell, 4 platinum band contacts, 12mm dia x 110 mm length, epoxy body, K=10 cell constant, 30K ohm thermistor, 3 ft cable with Waterproof Switchcraft connector. Range 0 to 200,000 micro-siemens."
|
|
Accessory - CB30
"pH Calibration Kit 500 mL Bottles: 4.0, 7.0, 10.0 pH Buffers and Probe Rinse"
|
|
Accessory - PCS50-01
500 ml bottle of Probe Cleaning Solution. Pepsin cleaning solution for removal of Protein Deposits.
|
| |
|
|
|
|
Accessory - CB80
Conductivity Kit - 4ea 500mL Bottles - 100uS, 1000uS, 10,000uS & 35ppt Salinity
|
|
" Probe Selection - PH30-GS"
Epoxy Body/ Glass Sensor Probe (for IQ150 System)
|
|
" Probe Selection - ORP110-GS"
"Model ORP110-GS Standard ORP probe (for IQ150 System -- BNC connector, 3' lead, 12x110mm barrel, platinum band)"
|
| |
|
|
|
|
IQ350 Waterproof Meter
Waterproof Conductivity, TDS, Salinity and Temp
This meter is a waterproof, handheld, non-glass instrument able to accurately measure Conductivity, TDS (Total Dissolved Solids), Salinity and Temperature. A rugged NEMA4x (IP 67) Waterproof, Chemical Resistant, Dust Resistant, Floating meter showcases an extra large LCD display with LED backlight.
This meter features automatic probe cell constant recognition with auto ranging, and up to five-point conductivity and TDS standardization. Complete with a solid-state four cell conductivity electrode, this easy to use ultra-rugged meter system is engineered to withstand harsh use in the most difficult of applications. Complete kit ships with a solid-state conductivity electrode.
Specification Details Here
IQ350NP
"Waterproof Conductivity, TDS and Salinity meter"
|
|
IQ350-KP5
IQ350NP Meter with CDW97-KP5 Probe
|
|
IQ350-Kit
"IQ350NP Meter with CDW97-KP5 Conductivity Probe, CC70-2 Field Carrying Case & Standard Kit, and RH10 Rubber Holster"
|
| |
|
|
|
|
" Probe Selection - CDW97-K1"
"Conductivity Probe, 4 platinum band contacts, 12mm dia x 110 mm length, glass body, K=1 cell constant, 30K ohm thermistor, 3 ft cable with waterproof Switchcraft connector. Range 0-120,000 micro-siemens." |
|
"Probe Selection - CDW97-KP5"
Conductivity probe, General purpose "bull's-eye" design: 4 cell, K=0.5 cell constant, epoxy body, graphite contacts, 30K ohm thermistor, 16mm dia x 110mm length,with 3 ft cable with Switchcraft waterproof connector. Range 0 to 100,000 micro-siemens NOTE: The "P" shown in conductivity probe part numbers denotes decimal point placement, e.g. KP5 stands for a cell constant of 0.5 |
|
" Probe Selection - CDW97-K10"
"Conductivity Probe for Salinity and Brackish Water, 4 cell, 4 platinum band contacts, 12mm dia x 110 mm length, epoxy body, K=10 cell constant, 30K ohm thermistor, 3 ft cable with Waterproof Switchcraft connector. Range 0 to 200,000 micro-siemens."
|
| |
|
|
|
|
Accessory - CB80
Conductivity Kit - 4ea 500mL Bottles - 100uS, 1000uS, 10,000uS & 35ppt Salinity
|
|
|
|
|
|
