T.K. ROBOMICS®
Ultra-High Speed Mixing System

Maintenance is not necessary with a newly developed brushless motor. Furthermore, the motor generates very little noise and is ideal for research environments.
With a maximum speed of 16,000 rpm, the equipment can obtain results and data that have not been possible with conventional mixers.
Uses a feedback system that keeps speed constant despite variations in load.
Wide variety of mixing section options (very small batch, continuous and vacuum). Yields accurate data that allows for conversion to mass-production standards.
Optional temperature sensor available.
Optional data logging (speed in revolutions, current, temperature) available.
more

T.K. ROBOMICS®
Ultra-High Speed Mixing System - A sterilized type to handle germ-free formulations

This unit can be used in a clean room (class 10 and over) thanks to our newly-developed brushless motor.

Fluctuation in speed due to sudden changes in load is eliminated through feedback system.

The new data logging function (for rpm, amperage and temperature) is available.
more

T.K. AUTO MIXER Model 20 , Model 40
High-Speed Emulsifier / Disperser

A feedback system allows for constant speed despite changes in viscosity and specific gravity of the material being processed, yielding accurate test data.

Mixing sections are interchangeable with T.K. HOMO MIXER MARK II and T.K. HOMO DISPER (option) depending on the purpose of processing.

Forward and reverse direction allows for powder particles to be emulsified and dispersed evenly and uniformly.
more

T.K. HOMO MIXER MARK II Model 2.5
High-Speed Emulsifier / Disperser

Compared to the conventional T.K. Homo Mixers, the time required to reach a specified particle size has been reduced by 20%.
The mixing section is easy to disassemble and easy to clean.
The newly-developed brushless motor is resistant to dust or dirt causing wear; therefore motor noise is kept to a minimum. The mixing speed is kept constant within the low rpm range.
Variation in particle size is reduced, permitting desired particle dispersion and emulsification.
Handles materials up to 70 Pa·S (70000 mPa·S)
more

T.K. HOMO MIXER MARK II Model 2.5
Vacuum Type

Air-tight hard glass vessel (or stainless steel) allows for vacuum emulsifying/dispersion.

Specifications:
Motor:
100V, 0.2kW, Commutator Motor 1000-11000rpm
Vessel:
2liters
Pressure:
Atmospheric-8kPa(60Torr)
more

T.K. HOMO MIXER MARK II Model 20
Pressure Type

Double mechanical seal design allows for high-pressure, high-temperature emulsions, dispersions and reactions.

Specifications:
Motor:
200V, 0.75kW, 1000-7200rpm
Vessel:
10 liters
Pressure:
0.4MPa(4kgf/cm2)
Shaft Sealing:
Double mechanical seal (with pressure pot)
more

T.K. HOMO DISPER Model 2.5
High-Speed Disperser

Suited for uniform dispersing and high-speed mixing.
Blades can be easily changed depending on the application.
The mixing section is easy to disassemble, making the unit easy to clean.
The newly-developed brushless motor is resistant to dust or dirt causing wear, and motor noise is kept to a minimum. The mixing speed is kept constant within the low rpm range.
more

T.K. AGI HOMO MIXER® Model 2M-03
Small Capacity Vacuum Emulsifying System

The small laboratory-use vacuum emulsifier can process 200cc to 300cc of highly viscous material such as cremes, cartilage and gels.
Optional upgrade allows for 500cc to be processed.
Switchable foward/reverse operation of T.K. Homo Mixer and Paddle Mixer is possible, making vacuum operation more efficient.
more

T.K. AGI HOMO MIXER® Model 2M-2 , Model 2M-5
Versatile Vacuum Emulsifier

Designed specifically with the necessary functions required by pharmaceutical and cosmetic research.
Small size makes it the ideal vacuum emulsifying equipment for research.

Very easy to connect; just attach the water and electricity. A vacuum mixer emulsifier that is all-in-one with a vacuum pump and water circulation unit.
more

T.K. HIVIS DISPER MIX® Model 3D-5
Triple shaft, Planetaly type Disperser / Kneader / Mixer

Mixing (dispersion) at high speed during kneading for the next generation of products.
The twisted blade that rotates on its axis while orbiting the vessel allows for even temperature of highly viscous material.
Optional software can collect data for conversion to mass-production conditions.
Expansion up to 1250 L is possible.
more

T.K. COMBI MIX® Model 3M-5
Multi-Purpose, Versatile Disperser / Kneader

Depending of the combination of mixer sections, a wide variety of mixing standards from emulsification and dispersion to mixing of highly viscous material is possible. Because it has a wide variety of uses such as mixing in a vacuum or under requirements that require heat exchange, it is an ideal mixer for research and development purposes.
The mixing unit can be selected from the following depending on the requirements.
more

T.K. COMBI MIX® Model 3M-5
Multi-Purpose, Versatile Disperser / Kneader

Depending of the combination of mixer sections, a wide variety of mixing standards from emulsification and dispersion to mixing of highly viscous material is possible. Because it has a wide variety of uses such as mixing in a vacuum or under requirements that require heat exchange, it is an ideal mixer for research and development purposes.
more

T.K. T.K. HIVIS MIX® Model 2P-03 , Model 2P-1
Small-Quantity Mixer / Kneader

The blade rotates on its axis while orbiting the vessel, resulting in uniform mixing, kneading and vacuum de-aeration.

Wide variety of uses from mixing of dry powder particle materials to kneading of high-viscosity material of 1000 Pa·s (1000000cPs).
more

T.K. HIVIS DISPER MIX® Model 3D-5
Triple shaft, Planetaly type Disperser / Kneader / Mixer

Mixing (dispersion) at high speed during kneading for the next generation of products.
The twisted blade that rotates on its axis while orbiting the vessel allows for even temperature of highly viscous material.
Optional software can collect data for conversion to mass-production conditions.
more

T.K. HIVIS DISPER MIX® Model 3D-20
Triple shaft, Planetary type Disperser / Kneader / Mixer

Through the triple-shaft planetary motion, mixing time is greatly reduced. A built-in T.K. Homo Disper allows for processing of a wide variety of materials.
T.K. Hivis Disper Mix Model 3D-5 can be upgraded. Also suited for sample production.
more

T.K. AUTO MIXER Model 20 with PIPELINE HOMO MIXER
Continuous Disperser / Emulsifier / Mixer

The PIPELINE HOMO MIXER is an inline emulsifying and dispersing mixer. The machine utilizes a pressure gap that occurs between the inlet and outlet to pull material from the inlet. The material is then emulsified and dispersed through a strong shearing force that is generated from a tiny distance between the turbine and stator.
Can be used in inline processing.
Can be used as an outboard mixer.
Equipped with pumping capacity.
more

T.K. FILMICS® Model 30-25
Thin-Film Spin System High-Speed Mixer

T.K. FILMICS has shattered conventional wisdom in mixing, giving rise to totally new technologies.

The thin-film, spin methodology ensures sharp distribution of nanometer-sized particles that has been impossible with conventional mixers. High speed revolution of turbine causes materials to form a thin film along the walls of the vessel. Because the centrifugal force is greater than gravity, the material is mixed in a closed-in space where a significant energy can be applied to it.
more

T.K. FILMICS® Model 56-50
Thin-Film Spin System High-Speed Mixer

T.K. FILMICS has shattered conventional wisdom in mixing, giving rise to totally new technologies.

The thin-film, spin methodology ensures sharp distribution of nanometer-sized particles that has been impossible with conventional mixers. High speed revolution of turbine causes materials to form a thin film along the walls of the vessel. Because the centrifugal force is greater than gravity, the material is mixed in a closed-in space where a significant energy can be applied to it.
more

Dispensing Unit complying with CIP / SIP

Best-suited for germ-free suspensions (emulsification, dispersion, dissolution) .
Secures an overall germ-free, hermetic operation cycle from dispersion to storage tank.
The mixer can be used by itself (2 liters-20 liters) for prescriptions in the preclinical to Phase I stage of germ-free formulation.
Can also be used as a pilot plant system.
Also available as a laboratory equipment for emulsification and dispersion.
more