VELP : ENVIOURMENT LINE
MODELS: ECO6
Thermoreactor with microprocessor controlled temperature and heating time and digital display
The thermoreactor ECO 6 is purposely designed for COD analysis and also for wet digestion of samples in the evaluation of metallic and non metallic elements in organic and inorganic materials (ores, alloys, animal feed, soils, sediments, tissues, etc.).
The instrument allows setting of time and temperature in wide intervals with high precision and reproductivity.
It allows simultaneous operation for 6 samples of 20 ml. The precision is very similar to the precision obtained with the traditional method employing large volumes and reflux refrigerator, although saving reagents.





MORE PRODUCTS ENVIOURMENT LINE

 
 
VELP : STIRRING LINE
MODELS: LH and DLH
The laboratory stirrers model LH and DLH are characterized by a high torque allowing their use with highly viscous liquids.
The powerful motor with a sturdy construction is microprocessor controlled assuring a constant speed also if variations of viscosity of the stirred liquid occur.
Choice of stirring speed between 50 and 2000 rpm.
A progressive start avoids spillages of stirred liquids.
A safety system against "over loads" protects the equipment in case of improper operation or motor failure.
The quality of manufacturing materials allows a continuous noiseless and precise operation, absolutely reproducible. The manufacturing technology assures a safe and easy use with a limited volume and weight.
The accurate ergonomic project, the modern and compact structure make these two models particularly attractive not only for their technical features but also for the nice design.
The model DLH is equipped with two digital displays showing clearly the set and the actual speeds.


MORE PRODUCTS STIRRING LINE

 
 
VELP : FOOD AND FEED LINE
MODELS: DK6
Digesters with increases of temperature
Instruments for wet digestions of liquid or solid samples projected according to G.L.P. Good Laboratory Practise.
The range from room temperature to 450°C is able to satisfy all the requirements for standard and Kjeldahl digestions.
The analysed sample is up to 15 ml for liquid or 5 g for solids. The digestion time varies according to the treated material and to the used methods.
The Velp digesters allow a work in reproducible conditions, with a full safety, saving chemicals, work and space in comparison to the traditional methods.
It is possible to remove the evolved fumes using specific accessories without the use of a fume hood.
The structure of the digesters is manufactured from stainless steel and is protected by a special resin and paints giving a high resistance to chemicals and mechanical corrosion.
The heating block holding the test tubes allows an optimal distribution of heat al all the selected temperatures.
Its location within the instrument avoids that in case of liquid spillages these will reach and damage Internal parts.
The temperature of the heating block is controlled by dedicated electronics with a microprocessor. The temperature probe does not require a calibration which is performed by the electronics at each turning up. This allow a very good precision and repeatability of tests. It is possible to upgrade the software of new version by using a personal computer for the innovative electronics with microprocessor.


MORE PRODUCTS FOOD AND FEED LINE

 
 
VELP : Peristaltic pump
MODELS: SP 311
A simple and effective single channel peristaltic pump with variable flow complete with tubing.
Designed for transferring liquids, gases, mixtures, emulsions, etc.
Designed for continuous sampling and dispensing in analytical automation.
Available in 4 models with different flows

Site Designed By SINGLASOFTECH
copyright©Venktron Electronics L.L.C.