In contrast to conventional Planetary Mills, the rotational speed of the grinding bowls and supporting disk can be configured separately in the PULVERISETTE 4 classic line with 2 working stations. Your advantage: A single mill for mechanical activating and alloying providing optimum grinding conditions suited to the respective material to be ground and the size of the grinding bowls and balls. The PULVERISETTE 4 classic line also operates according to the Planetary Principle, but the transmission ratio between grinding bowls and supporting disk is variable adjustable. Your advantage: You can directly influence the movement and paths of the grinding balls: Depending on the setting, you can obtain high impact energy or high friction, according to your needs, or have your PULVERISETTE 4 classic line operate as a Centrifugal Mill. You are free to choose all intermediate levels and combinations between friction-based and impact-based comminution.
For the Vario-Planetary Mill PULVERISETTE 4 classic line you require at least 2 grinding bowls of your choice and the corresponding number of grinding balls. The grinding bowl material must also be harder than the material to be ground. In normal cases, grinding bowls and balls of the same material are used. To shorten the grinding time, grinding bowls and balls with a higher density and correspondingly higher impact energy can be used. Please take note of the useful capacity, this is not identical with the bowl volume!